AN INITIAL LOOK AT AIR INDUCTION HOLLOW CONE NOZZLE-TIPS AND THE DISC AND CORE.
Just showing the arrangement of the air induction spray-tip set up for a light cover application.
Air induction tips at 15 bar.
Current setup using the standard disc
and cores also at 15 bar. Each farmer has his own theory and
specific disc and core combinations.
Besides worn nozzles just imagine if it
is possible to reduce the total volume sprayed in a season by say
20%. When you are going through 20'000'000 litres per season and you
can reduce that to 16'000'000 litres ...... THAT'S ONE MASSIVE
SAVING. LESS PRODUCT, LESS WEAR ON PUMPS AND EQUIPMENT AND LESS
DIESEL.
These mist blowers are essentially used
for light to medium cover sprays. No
comment at this stage as I'm tweaking the volumes and getting a feel
for the coverage. Once it is set up I'll test the
distribution with water sensitive paper. The season is at an end
and the only spraying is for false codling moth. Until next time
check the pressure guages, regulators and in-line filters.
TEL INTL: +2783 289 0327
TEL NATL: 083 289 0327
chemicon@multispray.com
KEEP AN EYE ON THIS PIC!!
I'll comment on the that nozzle on the top in future. START QUEUEING.
No comments:
Post a Comment