TECHNICAL REGULATORS

EST. 1979

REGULATORS

PRESSURE RELIEF AND THROTTLING VALVES

Piston Type

23120 available with 1/2” and 3/4” inlet and bypass. Also a 1/4” port for a pressure guage. Port plug also included. Pressure rating either up to 4 bar -60 psi or 10 bar - 150 psi.

NOTE:       23120 A fitted with 316 stainless steel spring and Viton o-ring for better chemical resistance.

The male thread screws into a tee-piece on the pressure side of the system. The bypass (female outlet) returns excess fluid back to the supply tank.

Pressure is adjusted by turning the top knob. The locknut holds the knob and maintains the selected pressure.

I have seen cases where the regulator is fitted in-line.  Not a good idea! The male threaded inlet as in image is fitted into the supply line and the female outlet  is fitted directly to the delivery side.  That's when you get a call telling you that,  "I can't adjust the pressure." 

You need more information!   Pressure, flow,  guages.

chemicon@multispray.com Tel Intl:  +27 83 289 0327    Tel Natl:   0832890327